
A rat blocker is one of the simplest, most permanent fixes available for a drain-based rat problem — but it's worth understanding what it actually does before you book one.
A rat blocker is a one-way valve fitted into a drain pipe. It allows waste water to flow out in the normal direction, but closes to stop anything — rats included — travelling back up the pipe from the sewer.
The two most common sizes are 4-inch (100mm), used on most standard domestic drain runs, and 6-inch (150mm), more often seen on larger runs or older and commercial properties. Which one you need depends on your pipework, confirmed during a quick inspection.
Once correctly fitted, yes — there's nothing to renew or maintain beyond keeping the drain itself in normal working order. It's a genuinely one-off job rather than something that needs revisiting.
Usually not. Most rat blockers are fitted at or near an existing, accessible inspection chamber, so there's no need to dig up drives or lawns to install one. A technician will confirm exactly where access is possible during the initial inspection.
Once correctly fitted, a rat blocker doesn't need regular servicing — it's a mechanical valve, not something that wears out under normal use. It's worth keeping in mind during any unrelated drain work, since a plumber unfamiliar with the valve could remove or disturb it without realising what it's there for.
No — it's a one-way valve that only closes against water trying to flow back up the pipe, so normal outflow isn't affected.
It's possible in principle, but correct sizing and fitting matter for it to work reliably, which is why we'd recommend having it professionally fitted.
They're suited to standard domestic and commercial drain runs of the common 4-inch and 6-inch sizes — anything unusual gets confirmed at survey stage.
Tell us what you're seeing and where, and we'll get back to you with a clear price.